FIT 2nd STRUT TOWER BARS (GRAY)

FIT 2nd STRUT TOWER BARS (GRAY)

Product Code: FIT / JAZZ
Availability: 缺貨
Qty:

Total Price:

USD$235.99
Ex Tax: USD$235.99 Price in reward points: 1000
NANE    :         STRUT TOWER BARS
MAKE    :         HONDA
MODEL :         FIT / JAZZ (Left-hand drive)
TYPE      :         2nd GE6/7/8/9(Left-hand drive)
           
NOTE     :        1PCS/SET


This item qualifies for FREE SHIPPING to the USA 48 contiguous states.

=================================================================================================

Unlike traditional engine bay strut tower bar, Kuo's Garage’s “Engine Bay Strut tower bar is different and unique.
We have added an additional feature, master cylinder stabilizer bracket, to help enthusiast on street/track performance.
Kuo’s Garage Engine Bay Strut tower Bar not only increased body rigidity, but it improves overall braking performance by 45%.
Installation process of Kuo’s Garage “Engine Bay Master Cylinder stabilizer Strut Tower Bar ( EBMC Bar)”.

Demo Car, USDM GE 5spd.


1.Take off, wipers, wiper cover, air boxes.


2. Kuo’s Garage Engine Bay M.S Stablizer Strut Tower Bar( EBMC Bar), unbolt right side bracket



3. Unbolt master cylnder bolts through on firewall.




4. Unbolt master cylinder container’s bolt.



5. After removing from the container, original two holes left by OEM



6. Install the bracket on Master Cylinder.


7. Putting bolts back as pic shown.



8. Take out the hardware package as picture shown


9. There are 3 sets of hardware as picture shown


10. Reuse factory holes.




11. Right side bracket done!!!


12. Now begin with Left side.


13. Unbolt ABS bolts off firewall



14. There are 2 bolts/nuts, total 4 of them.



15. Right next to AC lines, there is factory hole.


16. After revmoing ABS brackets, there is a small hook becaful on remvoing process.


17. Looking from Suspenion housing where is the hook holding at.


18. Use plier to pray it out slowly, becarful on removing process. Now we can remove abs bracket.


19. Kuo’s Garage Engine Bay M.S Stablizer Strut Tower Bar( EBMC Bar), unbolt left side bracket



20. Now install the EBMC bracket behind the ABS bracket as picture shown.


21. Put bolts back on the ABS bracket as picture shown


22. Put eveything back as pictures shown on following process.



23. Original factory hole.


24. Use the hardware package as picture shown below.


25. Bolt on




26. Left side done!!!


27.Remvoing the brake holes bracket on firewall.



28. Install the bar.


29. Bolt on right side.


30. Bolt on left side.


31. On the bar has a built in bracket for hose to click on.


32. Finished!!!

NANE   :         STRUT TOWER BARS
MAKE   :         HONDA
MODEL :         FIT / JAZZ (Left-hand drive)
TYPE    :         2nd GE6/7/8/9(Left-hand drive)
           
NOTE    :        1PCS/SET


This item qualifies for FREE SHIPPING to the USA 48 contiguous states.

=================================================================================================

Unlike traditional engine bay strut tower bar; Kuo's Garage’s “Engine Bay Strut tower bar” is different and unique.
We have added an additional feature, master cylinder stabilizer bracket, to help enthusiast on street/track performance.
Kuo’s Garage Engine Bay Strut tower Bar not only increased body rigidity, but improves overall braking performance by 45%.
Installation process of Kuo’s Garage “Engine Bay Master Cylinder stabilizer Strut Tower Bar ( EBMC Bar)”.

Demo Car, USDM GE 5spd.


1.Take off, wipers, wiper cover, air boxes.


2. Kuo’s Garage Engine Bay M.S Stabilizer Strut Tower Bar( EBMC Bar), unbolt right side bracket



3. Unbolt master cylnder bolts through on firewall.




4. Unbolt master cylinder container’s bolt.



5. After removing the container, you can see original two holes left by OEM



6. Install the bracket on Master Cylinder.


7. Put bolts back as picture shown.



8. Take out the hardware package as picture shown


9. There are 3 sets of hardware as picture shown


10. Reuse factory holes.




11. The right side bracket is done!!!


12. Now begin with Left side.


13. Unbolt ABS bolts off firewall



14. There are 2 bolts/nuts ( 4 in total).



15. There is a factory hole right next to the A/C duct/ pipe..


16. While removing ABS brackets, pay more attention to a small hook on removing process.


17. This is the hook.


18. Help yourself carefully and slowly with pliers. Now we can remove abs bracket..


19. Kuo’s Garage Engine Bay M.S Stablizer Strut Tower Bar( EBMC Bar), unbolt left side bracket



20. Now install the EBMC bracket behind the ABS bracket as picture shown.


21. Put bolts back on the ABS bracket as picture shown


22. Put eveything back as pictures shown on following process.



23. Original factory hole.


24. Use the hardware package as picture shown below.


25. Bolt on




26. Now left side is done, too!!


27.Remvoing the brake boost vacuum tube on firewall.



28. Install the bar.


29. Bolt on the right-side.


30. Bolt on left-side.


31.On the bar, there is a hook-like bracket for hose to click on.


32. Completed!!!