FIT 2nd THROTTLE SPACERS + SUB AIR CHAMBER
MAKE ： HONDA
MODEL ： FIT / JAZZ
TYPE ： 2nd GE6/7/8/9 (ONLY L15A)
NOTE ： 1PC/SET
This item qualifies for FREE SHIPPING to the USA 48 contiguous states.
Our product can maximize air volume and increase engine's horse power
Throttle spacers and sub air chamber installation instruction
First, take off wipers, wiper cover and air boxes.
Now you can see the throttle as shown in the picture, all we have to do is assemble the product into throttle and manifold.
Turn off the power and disassemble the throttle plug. (disconnect the battery if necessary)
Unbolt the bolts
Pay attention to the bolt nuts while unbolting, beware of dropping
Bolts and Nuts
These are all components of products
Fix the hose with hose clamps
Connect one side of the hose to the valve of the throttle spacers.
Separate the manifold and the throttle, and you will see an attachment frame underneath.
Hose must go under the attachment frame.
Here is the Packing.
Put it into the throttle and the spacer.
Now use our bolts. (Longer ones)
Connect the other side of the hose with sub air chamber.
Fix the sub air chamber.
There is an attachment frame under the air collection tank, press the attachment frame down by one centimeter with your hand.
Assemble the spacer on the air collection tank. (It must be assembled on the left as shown in the picture.)
Unscrew the screws.
After you follow the steps above and complete the whole procedure, you can assemble everything back